rolling mill

Detailed Product Description

Application of Rolling Mill:

Rolling Mill are of major technological significance in modern society. The aims of rolling mills are to reduce the thickness and change the metallurgical properties of a metal strip as it is passed through a pair of driven parallel cylindrical rolls.

Rolled sheet metal is an important material in modern manufacturing, rolled products are found everywhere in our daily lives.

Materials too wet for fine crushing and dry screening may be wet ground in a rod mill. Practice has demonstrated the ability of a rod mill to dry grind damp materials that will pack or plug other grinding equipment. and scrap loss are reduced by correct selection of liners for the specific grinding duty. Additional benefit results from use of a backing material, such as rubber between the liners and the mill shell.

The high external roll forces cause a permanent plastic deformation of the strip, decreasing its thickness and producing a corresponding increase in length. The strip may be either hot or cold rolled. For example steel plate (typically > 1.5mm) is hot rolled and steel sheet (typically < 0.1mm) or aluminium foil are cold rolled.
Rolled sheet metal is an important material in modern manufacturing, rolled products are found everywhere in our daily lives. Consider rolled aluminium products:

• Foil less than 0.2mm thick is used in packaging such as foil containers and wrapping, in electrical applications, building insulation and in printing industries.
• 0.2mm to 6mm thick has a wide variety of uses in construction industries such as sidings and roofing. Sheets also used in transport for automotive body panels, airframes and boat hulls.
• Plate over 6mm thick airframes, military vehicles, construction components for buildings and bridges.

Ball mill Series Main Technical parameters

Model	Shell rotation speed(r/min)	Ball load(t)	Feeding size(mm)	Discharging size(mm)	Capacity	Motor power(kw)	Weight(t)
					(t/h)
Ø900*1800	36-38	1.5	<=20	0.075-0.89	0.65-2	18.5	4.6
Ø900*3000	36	2.7	<=20	0.075-0.89	1.1-3.5	22	5.6
Ø1200*2400	36	3	<=25	0.075-0.6	1.5-4.8	30	12
Ø1200*3000	36	3.5	<=25	0.074-0.4	1.6-5	37	12.8
Ø1200*4500	32.4	5	<=25	0.074-0.4	1.6-5.8	55	13.8
Ø1500*3000	29.7	7.5	<=25	0.074-0.4	2-5	75	15.6
Ø1500*4500	27	11	<=25	0.074-0.4	3-6	110	21
Ø1500*5700	28	12	<=25	0.074-0.4	3.5-6	130	24.7
Ø1830*3000	25.4	11	<=25	0.074-0.4	4-10	130	28
Ø1830*4500	25.4	15	<=25	0.074-0.4	4.5-12	155	32
Ø1830*6400	24.1	21	<=25	0.074-0.4	6.5-15	210	34
Ø1830*7000	24.1	23	<=25	0.074-0.4	7.5-17	245	36
Ø2100*3000	23.7	15	<=25	0.074-0.4	6.5-36	155	34
Ø2100*4500	23.7	24	<=25	0.074-0.4	8-43	245	42
Ø2100*7000	23.7	26	<=25	0.074-0.4	8-48	280	50
Ø2200*4500	21.5	27	<=25	0.074-0.4	9-45	280	48.5
Ø2200*6500	21.7	35	<=25	0.074-0.4	14-26	380	52.8
Ø2200*7000	21.7	35	<=25	0.074-0.4	15-28	380	54
Ø2200*7500	21.7	35	<=25	0.074-0.4	15-30	380	56
Ø2400*3000	21	23	<=25	0.074-0.4	7-50	245	54
Ø2400*4500	21	30	<=25	0.074-0.4	8.5-60	320	65
Ø2700*4000	20.7	40	<=25	0.074-0.4	12-80	400	94
Ø2700*4500	20.7	48	<=25	0.074-0.4	12-90	430	102
Ø3200*4500	18	65	<=25	0.074-0.4	-----	800	137